🎟️ ENTRIES CLOSE 7.30PM - LIVE DRAWS THIS WEEK: MON 8PM | WED 8PM | FRI 8PM | SUN 9.30PM 🎥 FREE GIVEAWAYS EVERY SINGLE DAY LAUNCHED 8PM 🚀
🎟️ ENTRIES CLOSE 7.30PM - LIVE DRAWS THIS WEEK: MON 8PM | WED 8PM | FRI 8PM | SUN 9.30PM 🎥 FREE GIVEAWAYS EVERY SINGLE DAY LAUNCHED 8PM 🚀
🎟️ ENTRIES CLOSE 7.30PM - LIVE DRAWS THIS WEEK: MON 8PM | WED 8PM | FRI 8PM | SUN 9.30PM 🎥 FREE GIVEAWAYS EVERY SINGLE DAY LAUNCHED 8PM 🚀
£0.25Per Entry
(803823)
Brushless Motors deliver longer runtimes, less maintenance and better power control
Milwaukee’s New Generation up to 30% more efficient than Gen 2
Features the M18FPD3 and M18FID3 Combi Drill and Impact Driver
Includes 2x 5.0AH Batteries and Case
Improved rubber bit holder – easier bit storage
The Milwaukee M18 FPD3 18V FUEL Brushless Combi Drill is a 3rd generation power tool that delivers higher power efficiency under load with outstanding torque.
This impressively compact drill is only 175mm in length and allows for access into tight spaces. It includes a 13mm metal chuck for quick bit changes and quick bit retention.
The M18 FPD3 offers one of the fastest drilling and driving experiences on the market today. The drill also includes Milwaukee’s AUTOSTOP control mode which offers enhanced safety for the operator by preventing over-rotation in a bind-up. AUTOSTOP is an e-clutch system that will only allow a 45° kickback rotation. This means that if the tool hits any resistance within the material its working against, the drill will shut down immediately instead of over-rotating and causing you injury.
Chuck Type: 13mm All Metal Keyless Chuck
Reverse Control: Reverse Action
Number of Gears: 2
Max Torque: 135Nm
Max Bit Capacity in Wood: 89mm
Max Bit Capacity in Metal: 16mm
Max Bit Capacity in Masonry: 16mm
No Load Speed (RPM): 2000
Max. Percussion Rate (BPM): 0-33,000
Drilling Modes: Rotary and Rotary Hammer
The Milwaukee M18 FID3 18V FUEL Brushless ¼” Impact Driver is a 3rd generation power tool that delivers higher power efficiency under load with outstanding torque.
Compared to previous models, the M18 FID3 is noticeably faster and more intensely powerful offering up to 3900rpm and 4400ipm. With a total length of 113mm, this is perfect for fitting in to tight spaces.
The impact driver includes DRIVE CONTROL that allows the user to shift between one of four different speed and torque settings to maximise job versatility
Mode 1 for precision work
Mode 2 helps prevent damage to fasteners and material
Mode 3 delivers maximum performance for the toughest applications
Mode 4 is the optimum between precision work and maximum performance and automatically adjusts speed, impacts and torque
The impact driver includes a ¼″Hex chuck for quick and easy bit change as well as individual battery cell monitoring which optimises tool run time; ensuring long term pack durability.
Max Torque: 226Nm
No Load Speed (RPM): 4000
Bolt Size: M16
Impact Rate (IPM): 0-4400
These tools include three of Milwaukee’s exclusive technologies that make up the FUEL branding all for your benefit. The POWERSTATE Brushless motor helps maintaining the tool and ensures a longer operational life; the REDLITHIUM Battery packs which provide exceptional power for longer; and the REDLINK PLUS overload protection – maximising the power you need when you need it.
At the heart of this saw is the brushless motor that allows you to use it efficiently. As part of the design, the tool utilizes every bit of battery power when you need, all while reducing the need for ongoing maintenance by reducing the amount of heat generated and working more efficiently.
The technology in creating a brushless motor system allows for perfect symmetry between battery power and usage ensuring you get all the power you need, when you need it.
1x Milwaukee M18 FPD3 18V FUEL Brushless Combi Drill – Body
1x Milwaukee M18 FID3-0X 18V FUEL Brushless Impact Driver – Body
2x Belt Hooks
1x Support Handle
2x 5.0Ah Batteries
1x M12-18FC Fast Charger
1x HD Tool Case
(664921)
Brushless Motor delivers longer runtimes, less maintenance and better power control
All metal gear construction and metal gear housing on Combi Drill
Electronic 4 stage impact power selection on Impact Driver
Includes 2x high powered 5.0Ah Li-Ion 18V LXT Batteries
Ideal for a huge range of trades and application
The Makita DHP486 18V LXT Brushless Combi Drill is a heavy duty machine that is perfect for a huge range of applications.
Well balanced, and full of features, this combi drill is incredibly versatile. With 2 mechanical gears, electric brake, and dual-rotation modes, this drill delivers up to 2100rpm no load speed, and up to 31,500bpm.
The soft grip handle allows for comfortable use over extended periods, while the LED light brightens up your work area. The drill is equipped with a battery protection circuit to prevent any damages from over-discharge, overload and high temperatures.
The speed of rotation is comfortably controlled by the trigger which allows for variable speeds, while the 13mm keyless chuck allows for easy bit installation/removal by one hand.
The DHP485Z 18V LXT Brushless Combi Drill is certainly a capable drill all while being beautifully compact, with a maximum drill capacity in wood of 76mm, 16mm in masonry and 13mm in metal. It offers 22 torque settings with a maximum fastening torque of 130Nm.
Chuck Type: 13mm Keyless
Speed Control: Variable Speed
Reverse Control: Reverse Action
Number of Gears: 2
No Load Speed (RPM): 0-2100rpm
Max Torque: 130Nm
Max Bit Capacity in Wood: 76mm
Max Bit Capacity in Metal: 13mm
Max Bit Capacity in Masonry: 16mm
Impact Rate: 0-31,500ipm
Drilling Modes: Rotary, Rotary Hammer and Chiselling
Torque Settings 21
The Makita DTD172 18V LXT Brushless Impact Driver is an impressively powerful machine that includes a 4 stage impact power selection
Boasting a max 3800ipm impact rate speed providing an impressive 180Nm max torque, keyless single sleeve ¼” hex chuck, accepting M5 – M16 standard bolt, M4 – M8 machine screws, M5 – M14 high tensile bolt making it ideal for repetitive screwdriving in areas where access is limited thanks to its compact size
The percussive action provides an impressive 3800ipm impact rate, saving you time and effort, driving screws with minimal pressure required from the user.
The compact 1.1kg design with an overall length of 135mm makes it comfortable and balanced, ideal for use on site, whilst the ergonomic soft grip handle provides maximum comfort reducing user fatigue and providing greater tool control.
Max Torque: 180Nm
Machine Screw: M4 – M8
Bolt Size: M16
Impact Rate (IPM): 0-3800
Brushless Motor
At the heart of these tools is the brushless motor that allows you to use it efficiently. As part of the design, the tool utilizes every bit of power when you need, all while reducing the need for ongoing maintenance by reducing the amount of heat generated and working more efficiently.
The technology in creating a brushless motor system allows for perfect symmetry between battery power and usage ensuring you get all the power you need, when you need it.
1x Makita DHP486Z 18V LXT Brushless Combi Drill – Body
1x Makita DTD172Z 18V LXT Brushless Impact Driver – Body
2x 5.0Ah Batteries
1x DC18RC Fast Charger
1x MAKPAC Medium Case
(229350)
Brushless Motor delivers longer runtimes, less maintenance and better power control
Flexvolt Advantage enables the tool to recognise when an XR FLEXVOLT battery is attached and unlock even more power
Powerstack Batteries deliver more power with less space
High Performance, High Output
Perfect for a huge range of trades
The Dewalt DCK2052H1E1T 18V XR Brushless 2 Piece Kit contains a powerful combi drill along with an impressively compact impact driver.
The Dewalt DCD999 18V XR XRP Brushless Combi Drill with FLEXVOLT Advantage is a high powered drill with unique power options available.
When a dedicated FlexVolt Battery is attached, it will unlock up to 42% more power giving you the chance to work longer and enjoy the features that this drill has to offer.
Designed for durability, versatility and speed, this drill includes a metal 3-speed transmission, a brushless motor and a full metal ratcheting chuck with carbide inserts. The drill offers an electronic clutch with 11 torque settings for precision work when screwdriving and when using the hammer drill option.
Additional features include a LED Worklight at the base of the handle with a delay feature to allow for improved visibility in darker work areas; Intelligent Trigger for total control over all applications including operational speed.
The Dewalt DCD999 18V XR XRP Brushless Combi Drill offers a maximum no load speed of up to 2000rpm (2250rpm in Hammer Mode), up to 38,250bpm and 126Nm max Torque. It has a chuck capacity of 1.5-13mm.
Chuck Type: 13mm Keyless
Speed Control: Variable Speed
Number of Gears: 3
Max Bit Capacity in Wood: 55mm
Max Bit Capacity in Metal: 15mm
Max Bit Capacity in Masonry: 13mm
No Load Speed (RPM): 2000
Torque Settings: 11
Maximum Torque: 126Nm
Impact Rate (BPM): 38,250
The Dewalt DCF850 18V XR Brushless Impact Driver is an impressively compact power tool, measuring only 100mm in length, making it particularly good for working in small spaces.
Ideal for a range of trades such as general purpose, interior installation, electricians, plumbers, HVAC engineers, carpenters and more, this is particularly useful for putting screws, bolts and more into various materials with force.
Offering up to 205Nm of torque force, along with 3250rpm no load speed, this impressive impact driver includes an improved ¼” bit holder that prevents less run out when using it, as well as 3 different operation modes including precision drive for complete control.
Precision Drive Mode can pause the Impact Driver for one second before impacting. This protects the fastener and material surface, providing users with control during applications that require a high level of precision.
The variable speed trigger reduces the risk of over tightening while the LED ring light lets you see clearly the area you’re working in regardless of external lighting conditions.
Max Torque: 205Nm
No Load Speed (RPM): 3250
Impact Rate (IPM): 0-3800
Brushless Technology
At the heart of these tools is the brushless motor that allows you to use them efficiently. As part of the design, the tool utilizes every bit of battery power when you need, all while reducing the need for ongoing maintenance by reducing the amount of heat generated and working more efficiently.
The technology in creating a brushless motor system allows for perfect symmetry between battery power and usage ensuring you get all the power you need, when you need it.
1x Dewalt DCD999 18V XR XRP Brushless Combi Drill with FLEXVOLT Advantage – Body
1x Dewalt DCF850 18V XR Brushless Impact Driver – Body
2x Belt Clips
1x Drill Side Handle
1x 1.7Ah Powerstack Compact Battery
1x 5.0Ah Powerstack Battery
1x DCB1104 Battery Charger
1x TSTAK II Case
This competition is open to UK residents aged 18 or over. You may enter this competition up to 300 times. You will be randomly allocated ticket number(s) when ordering and will receive an email confirmation. The total amount of tickets for this competition is (3999). If all tickets do not sell out, the draw will happen on January 17, 2025 regardless. You must answer the competition question correctly to be entered into the live draw. Incorrect entries will not be notified or entered into the live draw. You may enter the competition online, or for free by post by sending your entry to Trade Tool Giveaways on a postcard. You must have an account on Trade Tool Giveaways for your entry to be processed. All details on your entry MUST correspond to the details on your account to receive the order confirmation and ticket number. Postal entries received without a registered account cannot be processed. The live draw will take place on Trade Tool Giveaways Facebook page using Google’s random number generator to select the winning ticket number from all Entrants. This competition is in no way sponsored, endorsed, administered by or associated with Facebook, Apple or Google. By entering the competitions, Entrants agree that neither Facebook, Apple nor Google have any liability and are not responsible for the administration or promotion of this competition.
You can enter this competition up to 300 times.
Once your order has been placed your ticket number(s) will be randomly allocated and will show on your order confirmation. They will also be emailed to you, and will be available in the my account area.
The draw is done live on Facebook using a random number generator to determine the winning ticket number. You’ll be contacted directly if you have won.
If all the entries are sold sooner the draw will be brought forward. Keep updated on the confirmed draw date via our Facebook page and website.
Download our mobile app to keep updated on all of our latest competitions, discounts and special offers whilst on the go!
