🎟️ ENTRIES CLOSE 7.30PM - LIVE DRAWS THIS WEEK: MON 8PM | WED 8PM | FRI 8PM | SUN 9.30PM 🎥 FREE GIVEAWAYS EVERY SINGLE DAY LAUNCHED 8PM ⏰
🎟️ ENTRIES CLOSE 7.30PM - LIVE DRAWS THIS WEEK: MON 8PM | WED 8PM | FRI 8PM | SUN 9.30PM 🎥 FREE GIVEAWAYS EVERY SINGLE DAY LAUNCHED 8PM ⏰
🎟️ ENTRIES CLOSE 7.30PM - LIVE DRAWS THIS WEEK: MON 8PM | WED 8PM | FRI 8PM | SUN 9.30PM 🎥 FREE GIVEAWAYS EVERY SINGLE DAY LAUNCHED 8PM ⏰
£0.05Per Entry
(905992)
PointSeQ HSS Twist Drill enables fast metal drilling due to the PointTeQ design on the drill bit.
Quick and easy tapping is possible because the self-centering tip prevents walking and due to the increased drilling rate, heat and wear are reduced.
The PointTeQ design on the drill bit remains sharp and withstands continuous use, suitable for drilling through and center holes in alloyed and unalloyed steel, in non-ferrous metals, cast steel, cast iron and plastic.
The shaft is cylindrical, the shank is equal to the diameter of the drill and is intended for drill presses and drill drivers, with a low risk of breakage, especially for drills with a diameter less than 6mm, as the drill has been made to have a highly elastic body.
The black oxide coated groove allows quick removal of the chips, manufactured according to DIN 338, drill type N (small side rake angle) with a point angle of 135°.
(568874)
The Bosch 6 Piece ¼” Shank Trim & Edging Router Bit Set are essential accessories for both hand-held and palm routers.
Each router bit includes a carbide cutting edges which ensures a long operational life while a variety of profiles make working with different materials possible.
It comes in an exclusive and highly robust case that firmly and securely holds bits, offering perfect protection for its contents for safe storage and transport. It features a transparent cover for visibility of the content.
(858316)
The Bosch 11 Piece SDS+ Mixed Hammer Drill Bit & Chisel Set are ideal for rotary hammer drill and demolition drills.
The drill bits have a 2 cutter tungsten carbide plate which increases its toughness and durability. The 2-flute U-shape flute design provides effective dust removal and standard lifetime.
The pointed chisel is suitable for various renovation and restoration jobs. It is equipped with a conical tip for chiselling without rotation stop while the flat edge chisel is perfect for large quantity removal.
(897514)
The Bosch 30 Piece Wood & Metal Jigsaw Blade Set contains sets of 10 popular blades for you to use when working with wood or metal.
T 119 BO Basic Wood Blades
Curved Cuts in Softwood
Milled, wavy-set teeth are ideal for cuts without special requirements
Narrow blade width is optimised for curved cuts
High carbon steel blade material is appropriate for cutting softwood and non-abrasive woodworking materials
– Total Length: 83mm
– Tooth Spacing: 2.0mm
– Material of Blade: HCS
– Max. Cutting Capacity: 15mm
T 111 C Basic Wood Blades
Cuts in Softwood
Milled, side-set teeth are ideal for cuts without special requirements
High carbon steel blade material is appropriate for cutting softwood and non-abrasive woodworking materials
Medium tooth pitch (3 mm) cuts thick woodworking materials with 4-50 mm thickness
– Total Length: 100mm
– Tooth Spacing: 3.0mm
– Material of Blade: HCS
– Max. Cutting Capacity: 50mm
T 118 A Basic Metal Blades
Cuts in Sheet Metal
Milled, wavy-set teeth are ideal for cuts without special requirements
Fully hardened, high-grade HSS blade material is appropriate for cutting non-perforated metal sheets
Very fine progressive tooth pitch (1.1-1.5 mm) cuts very thin solid sheet metals with 1-3 mm thickness
– Total Length: 92mm
– Tooth Spacing: 1.1 – 1.5mm
– Material of Blade: HSS
– Max. Cutting Capacity: 3mm
(827883)
The Bosch 6 Piece Wood and Metal Multi Tool Blade Set from ITS contains 6 durable blades ideal for working with metal and wood.
The collection includes both standard blades, and a Curved-Tec blade for more precise, clean cuts. Take on parquet, drywall, softwood, chipboard, plywood panel, laminate, non-ferrous sheet metal and more.
Designed for professional craftsmen and DIY enthusiasts, this robust set features a Starlock fitting system, which enables a greater range of applications and increases power transfer. Starlock also enables you to remove and exchange blades in 3 seconds without having to touch the blade.
(773663)
The Bosch 9 Piece Electricians Holesaw Set from ITS includes all the common sizes for electricians applications. The bi-metal Hole Saw offers smooth cutting through various materials.
Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for long-lasting cutting. Use this hole saw when cutting through wood, metal and plastics
The bi-metal Hole Saw fits all standard adapters on the market and ideal for gliding through material to provide smooth cuts.
(368360)
The Bosch S644D HCS 150mm Reciprocating Blade from ITS delivers clean curved and plunge cuts in wood.
The sharp-ground teeth enable tear-free cuts while the fully tapered body provides easy access to hard-to-reach areas and enables curved cutting.
The pointed tip allows for plunge cuts. The HCS blade material for cutting wood and non-abrasive woodworking materials in construction applications.
It’s a standard length of 150 mm for a 100 mm cutting capacity that fits all S-shank reciprocating saws.
(123325)
The Bosch PZ2 25mm Extra Hard Screwdriver Bits from ITS is a good choice for universal use.
Each bit is made from S2 Modified Steel and an optimised heat-treatment process that provides an extra-hard quality for a strong performance.
The tapered torsion zone easily handles torque peaks when screw-driving in all materials.
Suitable for use with Hex shank for maximum power transfer in standard three-jaw drills and hexagonal drill driver chucks.
This competition is open to UK residents aged 18 or over. You may enter this competition up to 700 times. You will be randomly allocated ticket number(s) when ordering and will receive an email confirmation. The total amount of tickets for this competition is (8499). If all tickets do not sell out, the draw will happen on January 31, 2024 regardless. You must answer the competition question correctly to be entered into the live draw. Incorrect entries will not be notified or entered into the live draw. You may enter the competition online, or for free by post by sending your entry to Trade Tool Giveaways on a postcard. You must have an account on Trade Tool Giveaways for your entry to be processed. All details on your entry MUST correspond to the details on your account to receive the order confirmation and ticket number. Postal entries received without a registered account cannot be processed. The live draw will take place on Trade Tool Giveaways Facebook page using Google’s random number generator to select the winning ticket number from all Entrants. This competition is in no way sponsored, endorsed, administered by or associated with Facebook, Apple or Google. By entering the competitions, Entrants agree that neither Facebook, Apple nor Google have any liability and are not responsible for the administration or promotion of this competition.
You can enter this competition up to 700 times.
Once your order has been placed your ticket number(s) will be randomly allocated and will show on your order confirmation. They will also be emailed to you, and will be available in the my account area.
The draw is done live on Facebook using a random number generator to determine the winning ticket number. You’ll be contacted directly if you have won.
If all the entries are sold sooner the draw will be brought forward. Keep updated on the confirmed draw date via our Facebook page and website.
Download our mobile app to keep updated on all of our latest competitions, discounts and special offers whilst on the go!
